Taming Wild Cities

Anything goes here.. :) Now with Beer Garden for our smoking patrons.
Post Reply
Message
Author
User avatar
Ho Really
Super Size Scraper Poster!
Posts: 2115
Joined: Sun Aug 27, 2006 3:29 pm
Location: In your head
Has thanked: 520 times
Been thanked: 61 times

Taming Wild Cities

#1 Post by Ho Really » Mon May 27, 2019 10:27 pm

Taming wild cities: the tall buildings of Australia show why we need strong design guidelines
May 24, 2019 6.00am AEST

Author
Timothy Moore
PhD Candidate, Melbourne School of Design, Monash University

Private enterprise has shaped the skylines of Australia’s cities, and the names of their highest towers reflect this. The towers of Sydney shout finance: Deutsche Bank, MLC, Ernst & Young, ANZ, Suncorp. The tall buildings of Perth read like a mining index: BHP Billiton, Rio Tinto, Woodside. In Melbourne, residential skyscrapers for investors make up the mass of new development, with names like Aurora, Verve, Empire and Vision – names that are timeless (and placeless).

The recent transformation of Australian city centres makes them appear unruly and wild, with their gilded towers, curtain walls compiled from a cladding company catalogue, and hybrid building types. Two-storey Victorian-era fronts abutt six-storey apartment buildings, or are completely engulfed by towers. This bricolage, paired with aspirational branding, creates the impression that property developers and financiers are the main drivers and shapers of this “anything goes” approach to urban development.

This is partly true. Market-driven development has always played a leading role in the urban settlement of Australia. But markets operate within a framework of rules that mitigate the negatives of urban development for the public good.

Governments have a key role in setting policies, rules and regulations that steer those driving urban development through the morass of planning policies, design guidelines and codes for buildings. Within these planning mechanisms, government actions should reflect the standards and expectations of the communities they represent.

So why is there such a gulf between what the centres of Australian cities look like, including their public spaces, and community expectations? Part of the problem is the lack of guidance about quality design during the planning and design phase and the consistent decision-making necessary to achieve it.

Take Melbourne, for example

Nowhere is this more obvious than some of Melbourne’s recently built tall towers.

Over the two decades up to 2015 there was a lack of strong regulation of planning schemes around taller buildings. In 1999 – when the economy was sluggish – the state government removed density controls from the city centre to allow maximum flexibility in property development.

These controls had established a maximum floor area ratio (FAR) of 12:1. This means that if a site has an area of 1,000 square metres, the construction of 12,000 square metres of floor space is allowed. It might be a building built across the whole site to 12 storeys, or a building on half the site to 24 storeys.

It is only by chance that Melbourne’s height limit was set between 265 metres and 315 metres, so that buildings did not intrude into aircraft flight paths.

The soaring heights of Melbourne’s buildings are not necessarily a major problem. The new residential towers take their share of the 100,000-plus new residents who move to Greater Melbourne each year, and these people are more likely to walk than drive. And restricting building heights does not necessarily lead to better buildings and neighbourhoods.

However, setting height limits through density controls – regulating floor areas, and apartments, in a building, block or precinct – is an important lever for achieving better design. It’s a form of regulatory “bargaining power”, permitting a few extra floors in return for better public amenity. Without it, there can be many bad outcomes, particularly at street level, as is obvious in some recently built towers.

The City of Melbourne’s 2018 report, Promoting High Quality Urban Design Outcomes in the Central City and Southbank, notes a “lack of design investment in the lower 20 metres of building facades and in particular in shopfront design” in the past. The problems include allowing parking above ground in podiums, tinted glass that renders active uses (such as common areas or commercial tenancies) invisible, and poor materials and architectural details that undermine the quality of the streetscape. This can contribute to poor visual connections between building occupiers and pedestrians, which reduces surveillance from above that would help make streets safer.

Some developments just look incredibly cheap and bland. There are flat finishes and facades, tinted glass, floor-to-ceiling glazing with repetitious frames and mullions, building services taking up much of the street frontage – despite the luxury apartment taglines used to market these towers.

Tighter controls for better design

Planning controls in the central city and Southbank area of Melbourne have become tighter since interim controls were put in place in 2015. These became permanent in 2016. Most of the podium and infill towers recently springing up in Melbourne received planning permission before then.

The new controls stipulate stronger requirements for minimum street setbacks, overshadowing, wind effects, FAR limits and tower separation. New height limits are based on density controls. However, high-rise apartment towers are still permitted to produce densities higher than those found in areas of Tokyo or Hong Kong.

These new planning controls have already led to a reduction in above-ground car park podiums, as developers aim to increase their yield in the face of restrictions on floor area ratios.

Despite these new planning provisions promoting quality design, there is still ambiguity around what good design means for Melbourne’s taller building proposals. This becomes an issue when tall buildings are subject to discretionary height limits.

The report Measurable Criteria to Assess Development Applications Exceeding Preferred Heights: Analysis and Recommendations by MGS Architects observed through several case studies across Melbourne – including in South Yarra and Collingwood – that extra height can be negotiated for projects that demonstrate a “high standard of architectural design”. But good design here may not relate to setbacks, overshadowing, provision of public space, or quality architectural details. It could be because a building is marketed as a “landmark”, “gateway” or “icon”.

But does a building’s height make it a landmark? If so, how high should it be? And should poor public amenity (such as generating traffic or overshadowing) be traded away because a building is “slender” and “sculptural”?

In the case of projects that went to the planning tribunal VCAT, the City of Melbourne report observed:
Where the tribunal was required to make a decision between an acceptable urban design outcome or project viability (such as the ability to achieve a viable tower envelope), viability and consolidation objectives prevailed on balance.
What more needs to be done?

Certainty and consistency are lacking. MGS Architects writes that this “undermines the public perception of a fair and orderly process for development approvals”.

All property developers, architects and planners desire consistency and clarity in urban planning, design and policy in order to deliver their projects – as do local communities. And despite moves in the right direction in Melbourne, there still is room to improve regulation. This includes introducing clearer density controls in relation to quality architectural design, a design review process in which designers lead decision-making and design-led envelope controls (where quantitative rules about where development is permitted are matched by qualitative rules that focus on how the building interfaces with the public realm).

However, to encourage innovation the regulations should still allow for flexibility.

The growth in Melbourne’s residential towers reinforces to the inhabitants of Australian cities the need to regulate for quality design outcomes. It acts as a warning for strategic town centres in Melbourne, and across Australia, that lack adequate quality control of their taller buildings.

Height restrictions were eased in part of Adelaide’s city centre this decade with the Capital City Development Plan Amendment. This led to a slew of new commercial, residential and hotel buildings over 100 metres proposed or under construction. Let’s hope that, with strong design guidelines, Adelaide avoids the mistakes of some of Melbourne’s recent additions.

The Conversation
Cheers
Confucius say: Dumb man climb tree to get cherry, wise man spread limbs.

rev
Super Size Scraper Poster!
Posts: 3742
Joined: Sat Nov 11, 2006 12:14 pm
Has thanked: 212 times
Been thanked: 321 times

Re: Taming Wild Cities

#2 Post by rev » Tue May 28, 2019 10:52 am

The construction boom in Melbourne is unreal. I usually travel there a few times a year, and even over the past five years the changes in their skyline particularly the northern part of their City/CBD are crazy. And there's so much more being built and on the way after that.

The removal of height restrictions in Adelaide is not comparable to Melbourne. It will never translate into the crazy building boom they have had and are having.
There's other factors that aren't present in Adelaide.

User avatar
SRW
Donating Member
Donating Member
Posts: 2157
Joined: Fri Jun 08, 2007 9:42 pm
Location: City
Has thanked: 460 times
Been thanked: 161 times

Re: Taming Wild Cities

#3 Post by SRW » Tue May 28, 2019 1:17 pm

The Victorian boom is unreal. Their newest state budget forecasts spending $107 billion on infrastructure, which is more than the Commonwealth intends to spend throughout the entire country. I mean, we wish we could do even a quarter of the transport projects they're doing: https://www.abc.net.au/news/2019-05-28/ ... e/11154536

Regarding towers as discussed in Ho Really's article, I do think there's an unhealthy obsession with them. Though towers have their place, the best outcome for the square mile (as opposed to solely the CBD) would be a predominance of projects the scale of Ergo Apartments, the East End and Bowden. Highly liveable, human scale neighbourhoods.
Keep Adelaide Weird

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 3 guests