News & Discussion: Trams

[ralmin]

Is is true that any station at which the tram-train needed to stop would have needed to be modified to have a platform at a lower height to suit boarding the tram-train?

[PD2/20]

I would suggest two factors in the abandonment. One of the drivers for the tram/train was to service Football Park at West Lakes. This was removed by the Adelaide Oval redevelopment initiated in 2010. The second factor was the need for gauge conversion. As this would have involved the entire AdMet network including the depot and stabling facilities and conversion of all rolling stock, it would have entailed extended system closures and logistical compexity.

Yes I understood gauge was part of the issue, but that is also covered in Eurooe by dual gauge tracks. Even without AAMI stadium now, the Wrst Lakes area is becoming quite high density and should be served by rail. Surely the combination of heavy rail serving the longer OH line and light rail using the same corridors but multiple branches was the ideal outcome for the North West. I don't get why it is so hard, when the technology already exists, as does the corridor.

How many of the European tram/train systems are in fact dual guage? Dual gauge track can be challenging with regard to platform clearances and pointwork construction. The comparitively small difference between stand and broad gauge also imposes limitations on the type and weight of rail and fasteners used.

[PD2/20]

Is is true that any station at which the tram-train needed to stop would have needed to be modified to have a platform at a lower height to suit boarding the tram-train?

Generally yes.

[claybro]

All of the "issues" we seem to find insurmountable are all covered in numerous examples elsewhere. You want a tram running in an underground metro?.. yep. It's just a tram in a tunnel. You want it to share a road?.. that's what they do. You want a tram to share a heavy rail track?..done.. multiple power sources ?.. yep. Hilly terrain?... check. Coupleing for more capacity.?..no probs.hell you want it to carry freight ?..yep. All running efficiently, suiting the exact need of a given area/demographic/ topography/cost. Meanwhile in Oz.. maybe with the exception of Melbourne, we find the most expensive, least efficient, average solution to any given need...then give up and decide buses are easier. Noisy polluting traffic clogging limited capacity buses. When our "experts" are dragged kicking and screaming to lay 500m of extra track.. it takes forever, costs even more.. and is then closed down for repairs and alterations.

[1NEEDS2POST]

One of the great things about the Outer Harbor route, in particular, is that it's straight from Nairne Junction to Port Adelaide. This means the wheel profile is not a concern, you could run trams or trains of any type. Dual gauge is difficult because of the closeness of broad and standard gauge, but bear in mind the inner rail only needs to support trams, so it could be thinner than the other rails.

Gauge conversion is not as difficult as it's made out to be. The rolling stock is easy to gauge convert. It only took two weeks to convert the Adelaide-Melbourne railway. Adelaide Metro has one fifth the track, plus the sleepers are ready to go. I reckon the Adelaide Metro network could be converted in a weekend.

[Spotto]

Gauge conversion is not as difficult as it's made out to be. The rolling stock is easy to gauge convert. It only took two weeks to convert the Adelaide-Melbourne railway. Adelaide Metro has one fifth the track, plus the sleepers are ready to go. I reckon the Adelaide Metro network could be converted in a weekend.

C'mon, this is Adelaide we're talking about...

[Goodsy]

Gauge conversion is not as difficult as it's made out to be. The rolling stock is easy to gauge convert. It only took two weeks to convert the Adelaide-Melbourne railway. Adelaide Metro has one fifth the track, plus the sleepers are ready to go. I reckon the Adelaide Metro network could be converted in a weekend.

After the American Civil War the entire American South brought their gauge into line with the rest of the USA.

They converted 11,500 miles of track in 36 hours

[EBG]

The metropolitan network was supposed to be convert to standard gauge in 2013!!!!!!!!!!!

[[Shuz]]

After the American Civil War the entire American South brought their gauge into line with the rest of the USA.

They converted 11,500 miles of track in 36 hours

Yeah, using black slavery... bit of an important omission there.

[SRW]

After the American Civil War the entire American South brought their gauge into line with the rest of the USA.

They converted 11,500 miles of track in 36 hours

Yeah, using black slavery... bit of an important omission there.

You might want to reread the timeline there -- after the Civil War and thereby also after emancipation and the 13th Amendment. You probably still have a valid point to make regarding labour rights and standards during the Reconstruction era versus nowadays that would roadblock replicating such a feat.

[Goodsy]

Yeah, using black slavery... bit of an important omission there.

no..

https://youtu.be/4v81Gwu6BTE?t=274s

[OlympusAnt]

Gauge conversion is not as difficult as it's made out to be. The rolling stock is easy to gauge convert. It only took two weeks to convert the Adelaide-Melbourne railway. Adelaide Metro has one fifth the track, plus the sleepers are ready to go. I reckon the Adelaide Metro network could be converted in a weekend.

C'mon, this is Adelaide we're talking about...

Working Bee baby!