Page 6 of 7
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Tue May 18, 2021 12:16 am
by EBG
Work on the footings has started on the southern end. there is a small set down area for service core/lift core. The tops of the piles are visible and there is a part buried sludge tank( with the 3 manhole covers)
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Jun 06, 2021 9:22 am
by EBG
Update 5/6/2021 they are doing the foundations in stages, but no sign of any crane base yet.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Mon Jun 07, 2021 11:45 am
by citywatcher
Might not have a set crane ?
Sent from my SM-A515F using Tapatalk
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Thu Jul 01, 2021 6:35 pm
by Patrick_27
The first precast walls for this were installed today, looks as though this won't have a fixed crane. I'm not sure why a lot of these smaller developments are opting against fixed cranes... It seems to drag out the construction period significantly and it also involves blocking off entire laneways or streets...
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Thu Jul 01, 2021 6:50 pm
by Jaymz
Patrick_27 wrote: ↑Thu Jul 01, 2021 6:35 pm
The first precast walls for this were installed today, looks as though this won't have a fixed crane. I'm not sure why a lot of these smaller developments are opting against fixed cranes... It seems to drag out the construction period significantly and it also involves blocking off entire laneways or streets...
My guess is it all comes down to cost and unfortunately they don't care much for the inconvenience it causes to locals or traffic flow. The problem must come down to it being approved in this form.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Jul 04, 2021 9:41 am
by EBG
Yes it appears that they are not having a tower crane? A view of the precast wall panels from the rear (Gunson St). Picture Saturday 3/7/2021
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Jul 04, 2021 12:06 pm
by gnrc_louis
Thanks for the pictures. Looking forward to this going up - this part of the city is starting to gain reasonable density. Now need for the nearby open-air car-park on Pulteney Street to get developed, the Paladio apartments site to get a new proposal and for the Tribe Hotel to go ahead.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sat Jul 10, 2021 8:24 pm
by EBG
Update 10/7/2021, this project is to have a steel frame.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Aug 22, 2021 12:58 am
by EBG
Up date from 14/8/2021. Concrete precast wall panels up to level 3 at rear.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Aug 22, 2021 1:07 pm
by Patrick_27
EBG wrote: ↑Sun Aug 22, 2021 12:58 am
Up date from 14/8/2021. Concrete precast wall panels up to level 3 at rear.
Even more work done on this site since this picture was taken, will try and get a few more pictures today.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sun Sep 05, 2021 9:41 pm
by EBG
Update 5/9/2021 some pictures from this weekend showing both front and rear views Note brownish /gold panels on the office part of the building.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Fri Sep 10, 2021 10:36 pm
by Ben
Crane going up tomorrow.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sat Sep 11, 2021 8:40 am
by Patrick_27
As Ben said.
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sat Sep 11, 2021 12:14 pm
by citywatcher
Strange build
First few floors by mobile then a fixed crane
What would be the reason for this? Has it been done before in Adelaide?
Sent from my SM-A515F using Tapatalk
[COM] Re: 266 - 270 Pulteney Street | 44m | 11 Levels | Mixed Use
Posted: Sat Sep 11, 2021 2:39 pm
by EBG
Another (later) view from today 11/9/2021. Note the tower sections taper 1/2 way up.